顶底背离指标软件

Ⅰ 通信达MACD顶底背离选股公式

学这些没用的

Ⅱ 用大智慧或通达信等软件筛选rsi指标底背离的个股。

A3:=BARSLAST(REF(CROSS("RSI.RSI1"(6,12,24),"RSI.RSI2"(6,12,24)),1));
B3:=REF(C,A3+1)>C AND REF("RSI.RSI1"(6,12,24),A3+1)<"RSI.RSI1"(6,12,24) AND CROSS("RSI.RSI1"(6,12,24),"RSI.RSI2"(6,12,24));
底背离: B3>0;

通达信软件用
点开公式管理器，找到条件选股，选择其他类型，把原码粘贴上去！

Ⅲ 朋友你好，请帮我做个顶底背离的公式选股器，谢谢了，好人一生平安!

DIFF:=EMA(DCLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=(DIFF-DEA)*2;
低位金:=CROSS(DIFF,DEA) AND DIFF<-0.1;
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
二次金:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,34)=1;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
选股预警:二次金 or 底背离;

Ⅳ 怎么把macd顶背离的选股公式输入到炒股软件里

赢者交易师的自带了“定量结构”选股，就是MACD底背离选股。顶背离选股意义不大吧？

Ⅳ rsi顶底背离选股公式请高手制作 通信达软件的 每一个大小顶底的波段背离都选出来只要过去式就可以了

LC:=REF(CLOSE,1);
A:=SMA(MAX(CLOSE-LC,0),6,1)/SMA(ABS(CLOSE-LC),6,1)*100;
底背离:C<=LLV(C,60) AND A>LLV(A,60) AND A>=REF(A,1);
上面这个是底背离的，下面的是顶背离的：
LC:=REF(CLOSE,1);
A:=SMA(MAX(CLOSE-LC,0),6,1)/SMA(ABS(CLOSE-LC),6,1)*100;
顶背离:C>=LLV(C,60) AND A<LLV(A,60) AND A<=REF(A,1);

Ⅵ 求通达信macd指标中包含:顶底背离、金叉死叉、macd上升红色下降绿色带箭头，谢谢！

{通达信MACD顶底背离指标---供参考！}

DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);

DEA:EMA(DIFF,9);

MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK2;

STICKLINE(MACD>REF(MACD,1),0,MACD,1,0),COLOR0000FF;

STICKLINE(MACD<REF(MACD,1),0,MACD,1,0),COLOR00FF00;

DRAWICON(REF(MACD,2)>REF(MACD,1) AND MACD>REF(MACD,1),MACD-0.2,1);

DRAWICON(REF(MACD,2)<REF(MACD,1) AND MACD<REF(MACD,1),MACD+0.2,2);

低位金叉:=CROSS(DIFF,DEA) AND DIFF<-0.1;

STICKLINE(低位金叉,0,0.08,6,0),COLORYELLOW;

DRAWTEXT(低位金叉,0.16,' 低位金叉'),COLORWHITE;

JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));

二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;

STICKLINE(二次金叉,0,0.06,6,0),COLORFF00FF;

DRAWICON(二次金叉,DEA*0.9,5) ;

DRAWTEXT(二次金叉,0.2,' 二次金叉'),COLORYELLOW;

死叉:=CROSS(DEA,DIFF);

DRAWICON(死叉,DIFF+0.2,6) ;

金叉:=CROSS(DIFF,DEA);

DRAWICON(金叉,DEA-0.2,17) ;

A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));

底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);

STICKLINE(底背离,0,0.03,6,0),COLOR00FF00;

DRAWTEXT(底背离,0.12,' 底背离'),COLORFF00FF;

A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));

顶背离:=REF(CLOSE,A2+1) AND CROSS(DEA,DIFF);

DRAWTEXT(低位金叉 AND 二次金叉 AND 底背离,0.25,'进场'),COLOR0000FF,LINETHICK2;

Ⅶ 朋友们好 求期货博弈大师软件上用的，MACD顶底背离指标，大榭！

DIFF : EMA(CLOSE,SHORT) - EMA(CLOSE,LONG);
DEA : EMA(DIFF,M);
MACD : 2*(DIFF-DEA), COLORSTICK

Ⅷ 求通达信MACD连续1次或以上《顶底背离》后，金叉或死叉出买卖信号指标及选股公式

你要的公式没办法分辨！要自己分辨
MACD底背离
DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
QZQ:=BARSLAST(REF(MACD,1)<0 AND MACD>0);
QM:=LLVBARS(MACD,QZQ+20);
MQDZ:=IF(QM>QZQ,REF(MACD,QM),0);
XG1:=MACD<0 AND MACD>MQDZ
AND CLOSE=LLV(CLOSE,QZQ+20) AND MQDZ<0;
XG:REF(XG1,1)=1 AND MACD>REF(MACD,1);
或者 {XG:REF(XG1,1)=1 AND MACD>REF(MACD,1)AND DIFF>REF(DIFF,10);}

Ⅸ 背离王指标怎样在底背离,顶背离加买卖点

{背离王}

A1:=FORCAST(EMA(C,5),6);

A2:=FORCAST(EMA(C,8),6);

A3:=FORCAST(EMA(C,11),6);

A4:=FORCAST(EMA(C,14),6);

A5:=FORCAST(EMA(C,17),6);

B:=A1+A2+A3+A4-4*A5;

TOWERC:=EMA(B,2);

FORCAST(EMA(B,3),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,4),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,5),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,6),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,7),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,8),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,9),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,10),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,11),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,12),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,13),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,14),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,15),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,16),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,17),6),POINTDOT,COLORGREEN;

STICKLINE(TOWERC>=REF(TOWERC,1),TOWERC,REF(TOWERC,1),3,0),COLORRED;

STICKLINE(TOWERC<REF(TOWERC,1),TOWERC,REF(TOWERC,1),3,0),COLORGREEN;

DRAWICON(REF(TOWERC,2)>REF(TOWERC,1) AND TOWERC>=REF(TOWERC,1),TOWERC-1,7);

DRAWICON(REF(TOWERC,2)<REF(TOWERC,1) AND TOWERC<REF(TOWERC,1),TOWERC+1,8);

Ⅹ 求高手编写大盘指数MACD周线顶底背离公式

顶背离或者底背离属于形态分析范畴，你要有具体的判断条件才能编写，你也没说具体怎么判断让别人怎么给你编写啊。

例如下面的macd背离画图主图与副图，要有具体判断条件才能编写。例如下图指标通过选择参数能对比dif值背离，dea值背离，macd柱背离，macd背驰。至于你想用在什么周期都可以，分钟，小时，日线，周线，月线等等都可以。