通达信bollm指标

⑴ 请教高人：在通达信软件中写一个把BOLL和MA组合使用指标，并当股价在中轨或中轨以上时,BOLL线显示为红色

可以写布林线收盘价在中轨上显示红色在中轨下显示绿色，但是通达信有两个布林线指标你要说清楚用哪个，例如下图布林线主图指标效果。

⑵ 怎么能让通达信boll布林带副图指标翻转180度让这个指标倒过来，有高手会修改吗

线都乘以-1不就倒过来了吗

BOLL:MA(CLOSE,M)*-1;
UB:BOLL+2*STD(CLOSE,M)*-1;
LB:BOLL-2*STD(CLOSE,M)*-1;

⑶ 通达信交易软件布林带指标（BOLL）设置问题

看图设置,有问题可以HI我

⑷ 通达信BOLL指标排名怎么用

一、收盘价向上突破下限，为买入信号；
二、收盘价向上突破上限，为卖出信号；
三、参数： N 天数，在计算布林带时用，一般26天
P一般为20，用于调整上限和下限的值

⑸ 通达信BOLL指标修改

cz：ub-lb drawnull;

⑹ 通达信如何设计boll指标条件选股

一、收盘价向上突破下限，为买入信号;二、收盘价向上突破上限，为卖出信号;三、参数: N 天数，在计算布林带时用，一般26天 P 一般为20，用于调整上限和下限的值

⑺ 通达信BOLL-M传统版的参数是多少

N:=20;
MID:=MA(C,N);
VAR1:=POW((C-MID),2);
VAR2:=MA(VAR1,N);
VAR3:=SQRT(VAR2);
UPPER:=MID+2*VAR3;
LOWER:=MID-2*VAR3;
BOLL:REF(MID,1),COLORFFFFFF;
UB:REF(UPPER,1),COLOR00FFFF;
LB:REF(LOWER,1),COLORFF00FF;

⑻ 通达信神奇公式怎么选股通达信神奇布林线股票指标公式如下：mid2：=m

{神奇布林线主图}
MID2 := MA(CLOSE,21),COLORWHITE;
UPPER2:=MID2 + 1.96*STD(CLOSE,21),COLORYELLOW;
LOWER2:=MID2 - 1.96*STD(CLOSE,21),COLORYELLOW;
UP2:=MID2 + 2.56*STD(CLOSE,21),COLORFF00FF;
LOOW2:=MID2 - 2.56*STD(CLOSE,21),COLORFF00FF;
{上升趋势}
STICKLINE(C>=MID2,MID2,UP2,2,0),COLOR330066;
{下降趋势}
STICKLINE(C<MID2,MID2,LOOW2,2,0),COLOR545454;
MID:MID2,COLORWHITE;
UPPER:UPPER2,COLORYELLOW;
UP:UP2,COLORFF00FF;
LOWER:LOWER2,COLORYELLOW;
LOOW:LOOW2,COLORFF00FF;
开口:=UP-LOOW;
相离:=C-MID;
DRAWTEXT(C>=MID AND REF(开口,1)=HHV(开口,20),UPPER,'减仓'),COLOR00FF00;
DRAWTEXT(C>=MID AND REF(相离,1)=LLV(相离,5),MID,'加仓');
股价多头:=C>MA(C,5) AND MA(C,5)>MA(C,10) AND MA(C,10)>MA(C,20);
DRAWTEXT(FILTER(股价多头,20),LOOW*0.95,'开始建仓'),COLORRED;
DRAWICON(FILTER(股价多头,20),LOWER,1),COLORRED;
DRAWTEXT(CROSS(MID,C),UP,'空仓观望'),COLORYELLOW;
DRAWICON(CROSS(MID,C),UPPER,2),COLORYELLOW;
{K线}
{STICKLINE((CLOSE > OPEN),CLOSE,OPEN,5.2,0),COLOR070084;}
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,4,1),COLOR0000A3;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,3.5,0),COLOR000033;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,3,0),COLOR000066;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,2.0,0),COLOR000099;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,1.5,0),COLOR0000CC;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,1.0,0),COLOR0000FF;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,0.5,0),COLORCC66FF;
STICKLINE((CLOSE > OPEN),OPEN,LOW,0.3,0),COLORRED;
STICKLINE((CLOSE > OPEN),CLOSE,HIGH,0.3,0),COLORRED;
{STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,5.2,0),COLOR070084;}
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,4,1),COLOR0000A3;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,3.5,0),COLOR0000B7;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,3,0),COLOR0000CD;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,2.0,0),COLOR0000E9;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,1.5,0),COLOR0754E9;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,1.0,0),COLOR076EF3;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,0.5,0),COLOR077BF3;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),OPEN,LOW,0.3,0),COLOR0000CD;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,HIGH,0.3,0),COLOR0000CD;
{STICKLINE((OPEN > CLOSE),CLOSE,OPEN,5.2,0),COLORFF5B00;}
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,4,1),COLORFF6C00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,3.5,0),COLORFF7B00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,2,0),COLORFF9C00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,1.5,0),COLORFFBE00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,1,0),COLORFFCC00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,0.5,0),COLORFFFF00;
STICKLINE((OPEN > CLOSE),CLOSE,LOW,0.3,0),COLORFF9C00;
STICKLINE((OPEN > CLOSE),OPEN,HIGH,0.3,0),COLORFF9C00;
{STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,5.2,0),COLORFF5B00;}
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,4,1),COLORFF6C00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,3.5,0),COLORFF7B00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,2,0),COLORFF9C00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,1.5,0),COLORFFBE00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,1,0),COLORFFCC00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,0.5,0),COLORFFFF00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,LOW,0.3,0),COLORFF9C00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),OPEN,HIGH,0.3,0),COLORFF9C00;
====================
{选股}
MID := MA(CLOSE,21);
相离:=C-MID;
加仓:=C>=MID AND REF(相离,1)=LLV(相离,5);
股价多头:=C>MA(C,5) AND MA(C,5)>MA(C,10) AND MA(C,10)>MA(C,20);
开始建仓:=FILTER(股价多头,20);
XG:加仓 OR 开始建仓;

⑼ 通达信的BOLL指标这么用

一般来说股价超上轨要下跌，超下轨要上涨，这样就可以测试股价波动是否正常。

⑽ 求通达信中，编写公式中使用BOLL_M主图叠加布林线的数值方法，或可以引用该指标数值的方法。

n（2 120 20）
BOLL:MA(CLOSE,N);
UB:BOLL+2*STD(CLOSE,N);
LB:BOLL-2*STD(CLOSE,N);
放到M主图即可.