我5macd脈沖指標源碼

㈠ 5分鍾短線交易，MACD指標參數設為多少最合適，交流一下

用KDJ吧。並且用在15分鍾。不過砍倉要狠。因為如果15分鍾在20以下或者80以上，很容易形成趨勢單。其實正確率應該比較高，就看你資金控制的好不好。自己看下歷史記錄就知道了。錯了別怪我。嘿嘿。我是來下指標的。

㈡ 跪求通達信冠軍MACD和冠軍背離線附圖指標源碼，那位大神給下！

{供參考}
{冠軍MACD+頂底背離畫線}
DIFF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD2:=2*(DIFF-DEA);
DU0:=CROSS(DIFF,0);
UD0:=CROSS(0,DIFF);
TDU0:=BARSLAST(DU0);
TUD0:=BARSLAST(UD0);
DU3:=REF(DU0,1);
UD3:=REF(UD0,1);
TDU3:=BARSLAST(DU3);
TUD3:=BARSLAST(UD3);
UDGLINE:=IF(TDU3<TUD3,REF(HHV(HIGH,2),TDU3),REF(LLV(LOW,2),TUD3));
JDU0:=REF(CLOSE,1)<=REF(UDGLINE,1) AND CLOSE>UDGLINE AND TDU0<TUD0;
JUD0:=REF(CLOSE,1)>=REF(UDGLINE,1) AND CLOSE<UDGLINE AND TUD0<TDU0;
JDU1:=JDU0 AND COUNT(JDU0,TDU0)=1;
JUD1:=JUD0 AND COUNT(JUD0,TUD0)=1;
STICKLINE(MACD2>=0,0,MACD2,1,1),COLOR0000FF;
STICKLINE(MACD2>=0 AND MACD2<REF(MACD2,1),0,MACD2,1,0),COLORGREEN;
STICKLINE(MACD2<0,0,MACD2,2,0),COLORFFFF00;
STICKLINE(MACD2<0 AND MACD2>REF(MACD2,1),0,MACD2,1,1),COLORFFFF00;
STICKLINE(CLOSE>0,0,0,1,0),COLOR808080;
DEFUT:=BARSLAST(CROSS(MACD2,0));
DEFDT:=BARSLAST(CROSS(0,MACD2));
DEFUL:=IF(MACD2>=0,HHV(MACD2,DEFUT+1),REF(HHV(MACD2,DEFUT+1),DEFDT+1));
DEFDL:=IF(MACD2<0,LLV(MACD2,DEFDT+1),REF(LLV(MACD2,DEFDT+1),DEFUT+1));
DEFU2L:=REF(DEFUL,DEFUT+1);
DEFD2L:=REF(DEFDL,DEFDT+1);
DRAWICON(LLV(MACD2,4)>0 AND MACD2<REF(MACD2,1) AND REF(MACD2,1)>REF(MACD2,2) AND REF(MACD2,2)>REF(MACD2,3),MACD2+0.38,9);
DRAWICON(HHV(MACD2,4)<0 AND MACD2>REF(MACD2,1) AND REF(MACD2,1)<REF(MACD2,2) AND REF(MACD2,2)<REF(MACD2,3),MACD2-0.13,11);
DRAWICON((JUD1 OR BARSLAST(JDU1)>BARSLAST(JUD1)) AND MACD2>=0 AND REF(MACD2,1)<REF(DEFU2L,1) AND MACD2>DEFU2L,MACD2+0.50,5);
DRAWICON((JDU1 OR BARSLAST(JDU1)<BARSLAST(JUD1)) AND MACD2<0 AND REF(MACD2,1)>REF(DEFD2L,1) AND MACD2<DEFD2L,MACD2-0.14,6);
VAR111:=JDU1 OR BARSLAST(JDU1)<BARSLAST(JUD1);
VAR112:=HHV(MACD2,4)<0 AND MACD2>REF(MACD2,1) AND REF(MACD2,1)<REF(MACD2,2) AND REF(MACD2,2)<REF(MACD2,3);
價因子:=IF(CLOSE/OPEN>1.06,2.5,0),COLORLIBLUE;
STICKLINE(價因子,0,1,1,1),COLORYELLOW;
量變線:=VOL/MA(VOL,5)COLORWHITE,LINETHICK2;
量因子:=IF(VOL/MA(VOL,5)>2,2.5,0);
STICKLINE(量因子,0,1,1,1),COLORYELLOW;
DRAWICON(CLOSE/OPEN>1.06,1,24);
DRAWICON(VOL/MA(VOL,5)>2,0.8,25);
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背離:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
STICKLINE(底背離,0,0.03,6,0),COLOR00FF00;
底背:DRAWLINE(A1=0,DEA,底背離,DEA,0),COLORRED,LINETHICK4;
DRAWTEXT(底背離,0.12,' 底背離'),COLORFF00FF;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
頂背離:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
頂背:DRAWLINE(A2=0,DEA,頂背離,DEA,0),COLORGREEN,LINETHICK4;
DRAWICON(CROSS(DIFF,DEA),DEA,1);
DRAWICON(CROSS(DEA,DIFF),DEA,2);

㈢ 如何編寫通達信macd主圖指標源碼

DIF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIF,9);
MACD:(DIF-DEA)*2,COLORSTICK;

㈣ 通達信指標編寫macd

DIF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIF,9);
MACD:=(DIF-DEA)*2;
T1:=COUNT(DEA>0,20)=20;
T2:=T1=1&&MACD>0;
XG:T2=1&&REF(T2,1)=0;

㈤ 朋友你的MACD和KDJ 合為一個指標正是我需要的可以提供源碼嗎 謝謝

這個就可用了，簡單就好，不要搞得太復雜。需要設置可變參數,可修改KDJ的9-3-3為M,N1,N2.MACD的參數也同樣可改。

{KDJ_MACD}

RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100;

K:SMA(RSV,3,1),NODRAW;

D:SMA(K,3,1),NODRAW;

J:3*K-2*D,NODRAW;

DIF:EMA(CLOSE,12)-EMA(CLOSE,26),COLORWHITE;

DEA:EMA(DIF,9),COLORYELLOW;

MACD:(DIF-DEA)*2,COLORSTICK;

DRAWBAND(K/25,RGB(255,0,0),K/25,RGB(0,0,0));

DRAWBAND(D/25,RGB(0,255,0),D/25,RGB(0,0,0));

DRAWBAND(J/25,RGB(0,0,255),J/25,RGB(0,0,0));