通達信bollm指標

⑴ 請教高人：在通達信軟體中寫一個把BOLL和MA組合使用指標，並當股價在中軌或中軌以上時,BOLL線顯示為紅色

可以寫布林線收盤價在中軌上顯示紅色在中軌下顯示綠色，但是通達信有兩個布林線指標你要說清楚用哪個，例如下圖布林線主圖指標效果。

⑵ 怎麼能讓通達信boll布林帶副圖指標翻轉180度讓這個指標倒過來，有高手會修改嗎

線都乘以-1不就倒過來了嗎

BOLL:MA(CLOSE,M)*-1;
UB:BOLL+2*STD(CLOSE,M)*-1;
LB:BOLL-2*STD(CLOSE,M)*-1;

⑶ 通達信交易軟體布林帶指標（BOLL）設置問題

看圖設置,有問題可以HI我

⑷ 通達信BOLL指標排名怎麼用

一、收盤價向上突破下限，為買入信號；
二、收盤價向上突破上限，為賣出信號；
三、參數： N 天數，在計算布林帶時用，一般26天
P一般為20，用於調整上限和下限的值

⑸ 通達信BOLL指標修改

cz：ub-lb drawnull;

⑹ 通達信如何設計boll指標條件選股

一、收盤價向上突破下限，為買入信號;二、收盤價向上突破上限，為賣出信號;三、參數: N 天數，在計算布林帶時用，一般26天 P 一般為20，用於調整上限和下限的值

⑺ 通達信BOLL-M傳統版的參數是多少

N:=20;
MID:=MA(C,N);
VAR1:=POW((C-MID),2);
VAR2:=MA(VAR1,N);
VAR3:=SQRT(VAR2);
UPPER:=MID+2*VAR3;
LOWER:=MID-2*VAR3;
BOLL:REF(MID,1),COLORFFFFFF;
UB:REF(UPPER,1),COLOR00FFFF;
LB:REF(LOWER,1),COLORFF00FF;

⑻ 通達信神奇公式怎麼選股通達信神奇布林線股票指標公式如下：mid2：=m

{神奇布林線主圖}
MID2 := MA(CLOSE,21),COLORWHITE;
UPPER2:=MID2 + 1.96*STD(CLOSE,21),COLORYELLOW;
LOWER2:=MID2 - 1.96*STD(CLOSE,21),COLORYELLOW;
UP2:=MID2 + 2.56*STD(CLOSE,21),COLORFF00FF;
LOOW2:=MID2 - 2.56*STD(CLOSE,21),COLORFF00FF;
{上升趨勢}
STICKLINE(C>=MID2,MID2,UP2,2,0),COLOR330066;
{下降趨勢}
STICKLINE(C<MID2,MID2,LOOW2,2,0),COLOR545454;
MID:MID2,COLORWHITE;
UPPER:UPPER2,COLORYELLOW;
UP:UP2,COLORFF00FF;
LOWER:LOWER2,COLORYELLOW;
LOOW:LOOW2,COLORFF00FF;
開口:=UP-LOOW;
相離:=C-MID;
DRAWTEXT(C>=MID AND REF(開口,1)=HHV(開口,20),UPPER,'減倉'),COLOR00FF00;
DRAWTEXT(C>=MID AND REF(相離,1)=LLV(相離,5),MID,'加倉');
股價多頭:=C>MA(C,5) AND MA(C,5)>MA(C,10) AND MA(C,10)>MA(C,20);
DRAWTEXT(FILTER(股價多頭,20),LOOW*0.95,'開始建倉'),COLORRED;
DRAWICON(FILTER(股價多頭,20),LOWER,1),COLORRED;
DRAWTEXT(CROSS(MID,C),UP,'空倉觀望'),COLORYELLOW;
DRAWICON(CROSS(MID,C),UPPER,2),COLORYELLOW;
{K線}
{STICKLINE((CLOSE > OPEN),CLOSE,OPEN,5.2,0),COLOR070084;}
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,4,1),COLOR0000A3;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,3.5,0),COLOR000033;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,3,0),COLOR000066;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,2.0,0),COLOR000099;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,1.5,0),COLOR0000CC;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,1.0,0),COLOR0000FF;
STICKLINE((CLOSE > OPEN),CLOSE,OPEN,0.5,0),COLORCC66FF;
STICKLINE((CLOSE > OPEN),OPEN,LOW,0.3,0),COLORRED;
STICKLINE((CLOSE > OPEN),CLOSE,HIGH,0.3,0),COLORRED;
{STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,5.2,0),COLOR070084;}
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,4,1),COLOR0000A3;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,3.5,0),COLOR0000B7;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,3,0),COLOR0000CD;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,2.0,0),COLOR0000E9;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,1.5,0),COLOR0754E9;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,1.0,0),COLOR076EF3;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,OPEN,0.5,0),COLOR077BF3;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),OPEN,LOW,0.3,0),COLOR0000CD;
STICKLINE((CLOSE = OPEN AND C>REF(C,1)),CLOSE,HIGH,0.3,0),COLOR0000CD;
{STICKLINE((OPEN > CLOSE),CLOSE,OPEN,5.2,0),COLORFF5B00;}
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,4,1),COLORFF6C00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,3.5,0),COLORFF7B00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,2,0),COLORFF9C00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,1.5,0),COLORFFBE00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,1,0),COLORFFCC00;
STICKLINE((OPEN > CLOSE),CLOSE,OPEN,0.5,0),COLORFFFF00;
STICKLINE((OPEN > CLOSE),CLOSE,LOW,0.3,0),COLORFF9C00;
STICKLINE((OPEN > CLOSE),OPEN,HIGH,0.3,0),COLORFF9C00;
{STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,5.2,0),COLORFF5B00;}
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,4,1),COLORFF6C00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,3.5,0),COLORFF7B00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,2,0),COLORFF9C00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,1.5,0),COLORFFBE00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,1,0),COLORFFCC00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,OPEN,0.5,0),COLORFFFF00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),CLOSE,LOW,0.3,0),COLORFF9C00;
STICKLINE((OPEN = CLOSE AND C<REF(C,1)),OPEN,HIGH,0.3,0),COLORFF9C00;
====================
{選股}
MID := MA(CLOSE,21);
相離:=C-MID;
加倉:=C>=MID AND REF(相離,1)=LLV(相離,5);
股價多頭:=C>MA(C,5) AND MA(C,5)>MA(C,10) AND MA(C,10)>MA(C,20);
開始建倉:=FILTER(股價多頭,20);
XG:加倉 OR 開始建倉;

⑼ 通達信的BOLL指標這么用

一般來說股價超上軌要下跌，超下軌要上漲，這樣就可以測試股價波動是否正常。

⑽ 求通達信中，編寫公式中使用BOLL_M主圖疊加布林線的數值方法，或可以引用該指標數值的方法。

n（2 120 20）
BOLL:MA(CLOSE,N);
UB:BOLL+2*STD(CLOSE,N);
LB:BOLL-2*STD(CLOSE,N);
放到M主圖即可.