① 通达信。指标问题
删除这句
STICKLINE(FILTER(C,60)>0,高点,低点,0.5,0),COLORRED;
或在后面加上,NODRAW变成：
STICKLINE(FILTER(C,60)>0,高点,低点,0.5,0),COLORRED,NODRAW;
竖线消失
参数Q为9.不知源码中的Q为多少
所画的每小时分界线参照分时图上的格线。
② 麻烦老师把下面通达信分时公式改成预警公式 要求同时出现猛虎出笼信号时预警下面是公式源码
A1:=AMOUNT/VOL/100;
A2:=(3*HIGH+LOW+OPEN+2*CLOSE)/7;
A3:=SUM(AMOUNT,40)/A1/100;
A4:=SUM(AMOUNT,80)/A1/100;
B1:=DMA(A2,VOL/A3);
B2:=DMA(A2,VOL/A4);
B3:=(CLOSE-B1)/B1*100;
B4:=(CLOSE-B2)/B2*100;
现价:=C;
分时确认:=MA(REF(HHV(C,60),1),2);
均价:=SUM(现价*V,240)/SUM(V,240);
回调认同:=EMA(EXPMA(C,20),13);
分时压力:=MA(REF(HHV(C,30),1),2);
分时支撑:=MA(REF(LLV(C,30),1),2);
RSV:=(CLOSE-LLV(LOW,Q))/(HHV(HIGH,Q)-LLV(LOW,Q))*100;
K:=SMA(RSV,5,1);
D:=SMA(K,3,1);
J:=3*K-2*D;
VAR2:=EMA(J,6);
VAR3:=(CLOSE-LLV(LOW,21))/(HHV(HIGH,21)-LLV(LOW,21))*100;
VAR4:=SMA(VAR3,13,8);
VAR5:=CEILING(SMA(VAR4,13,8));
VAR6:="SSRP.MA1";
VAR7:="SSRP.MA2";
SIGNAL1:=CROSS(VAR5,VAR2) AND C>=均价;
SIGNAL2:=(CROSS(VAR5,VAR2) AND B3>0.6 AND C>=均价);
SIGNAL3:=(CROSS(VAR6,VAR7) AND B3>0.6 AND C>=均价);
XG:SIGNAL1 AND (SIGNAL2 AND VAR6>VAR7) {OR (SIGNAL3 AND VAR5>VAR2)};
③ 麻烦老师将下面通达信分时指标做成预警公式 要求 同时出现 虎 出笼 信号选中预警
A1:=AMOUNT/VOL/100;
A2:=(3*HIGH+LOW+OPEN+2*CLOSE)/7;
A3:=SUM(AMOUNT,40)/A1/100;
A4:=SUM(AMOUNT,80)/A1/100;
B1:=DMA(A2,VOL/A3);
B2:=DMA(A2,VOL/A4);
B3:=(CLOSE-B1)/B1*100;
B4:=(CLOSE-B2)/B2*100;
均价:=SUM(C*V,240)/SUM(V,240);
RSV:=(CLOSE-LLV(LOW,Q))/(HHV(HIGH,Q)-LLV(LOW,Q))*100;
K:=SMA(RSV,5,1);
D:=SMA(K,3,1);
J:=3*K-2*D;
VAR2:=EMA(J,6);
VAR3:=(CLOSE-LLV(LOW,21))/(HHV(HIGH,21)-LLV(LOW,21))*100;
VAR4:=SMA(VAR3,13,8);
VAR5:=CEILING(SMA(VAR4,13,8));
VAR6:="SSRP.MA1";
VAR7:="SSRP.MA2";
SIGNAL1:=CROSS(VAR5,VAR2) AND C>=均价;
SIGNAL2:=(CROSS(VAR5,VAR2) AND B3>0.6 AND C>=均价);
SIGNAL3:=(CROSS(VAR6,VAR7) AND B3>0.6 AND C>=均价);
SIGNAL1 AND SIGNAL3 AND VAR5>VAR2;
{根据分析，“出笼”为红色时胜率比粉色高，粉色过于频繁故不预警。但通达信好像不支持分时预警}。