頂底背離指標軟體

Ⅰ 通信達MACD頂底背離選股公式

學這些沒用的

Ⅱ 用大智慧或通達信等軟體篩選rsi指標底背離的個股。

A3:=BARSLAST(REF(CROSS("RSI.RSI1"(6,12,24),"RSI.RSI2"(6,12,24)),1));
B3:=REF(C,A3+1)>C AND REF("RSI.RSI1"(6,12,24),A3+1)<"RSI.RSI1"(6,12,24) AND CROSS("RSI.RSI1"(6,12,24),"RSI.RSI2"(6,12,24));
底背離: B3>0;

通達信軟體用
點開公式管理器，找到條件選股，選擇其他類型，把原碼粘貼上去！

Ⅲ 朋友你好，請幫我做個頂底背離的公式選股器，謝謝了，好人一生平安!

DIFF:=EMA(DCLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=(DIFF-DEA)*2;
低位金:=CROSS(DIFF,DEA) AND DIFF<-0.1;
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
二次金:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,34)=1;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背離:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
選股預警:二次金 or 底背離;

Ⅳ 怎麼把macd頂背離的選股公式輸入到炒股軟體里

贏者交易師的自帶了「定量結構」選股，就是MACD底背離選股。頂背離選股意義不大吧？

Ⅳ rsi頂底背離選股公式請高手製作 通信達軟體的 每一個大小頂底的波段背離都選出來只要過去式就可以了

LC:=REF(CLOSE,1);
A:=SMA(MAX(CLOSE-LC,0),6,1)/SMA(ABS(CLOSE-LC),6,1)*100;
底背離:C<=LLV(C,60) AND A>LLV(A,60) AND A>=REF(A,1);
上面這個是底背離的，下面的是頂背離的：
LC:=REF(CLOSE,1);
A:=SMA(MAX(CLOSE-LC,0),6,1)/SMA(ABS(CLOSE-LC),6,1)*100;
頂背離:C>=LLV(C,60) AND A<LLV(A,60) AND A<=REF(A,1);

Ⅵ 求通達信macd指標中包含:頂底背離、金叉死叉、macd上升紅色下降綠色帶箭頭，謝謝！

{通達信MACD頂底背離指標---供參考！}

DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);

DEA:EMA(DIFF,9);

MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK2;

STICKLINE(MACD>REF(MACD,1),0,MACD,1,0),COLOR0000FF;

STICKLINE(MACD<REF(MACD,1),0,MACD,1,0),COLOR00FF00;

DRAWICON(REF(MACD,2)>REF(MACD,1) AND MACD>REF(MACD,1),MACD-0.2,1);

DRAWICON(REF(MACD,2)<REF(MACD,1) AND MACD<REF(MACD,1),MACD+0.2,2);

低位金叉:=CROSS(DIFF,DEA) AND DIFF<-0.1;

STICKLINE(低位金叉,0,0.08,6,0),COLORYELLOW;

DRAWTEXT(低位金叉,0.16,' 低位金叉'),COLORWHITE;

JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));

二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;

STICKLINE(二次金叉,0,0.06,6,0),COLORFF00FF;

DRAWICON(二次金叉,DEA*0.9,5) ;

DRAWTEXT(二次金叉,0.2,' 二次金叉'),COLORYELLOW;

死叉:=CROSS(DEA,DIFF);

DRAWICON(死叉,DIFF+0.2,6) ;

金叉:=CROSS(DIFF,DEA);

DRAWICON(金叉,DEA-0.2,17) ;

A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));

底背離:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);

STICKLINE(底背離,0,0.03,6,0),COLOR00FF00;

DRAWTEXT(底背離,0.12,' 底背離'),COLORFF00FF;

A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));

頂背離:=REF(CLOSE,A2+1) AND CROSS(DEA,DIFF);

DRAWTEXT(低位金叉 AND 二次金叉 AND 底背離,0.25,'進場'),COLOR0000FF,LINETHICK2;

Ⅶ 朋友們好 求期貨博弈大師軟體上用的，MACD頂底背離指標，大榭！

DIFF : EMA(CLOSE,SHORT) - EMA(CLOSE,LONG);
DEA : EMA(DIFF,M);
MACD : 2*(DIFF-DEA), COLORSTICK

Ⅷ 求通達信MACD連續1次或以上《頂底背離》後，金叉或死叉出買賣信號指標及選股公式

你要的公式沒辦法分辨！要自己分辨
MACD底背離
DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
QZQ:=BARSLAST(REF(MACD,1)<0 AND MACD>0);
QM:=LLVBARS(MACD,QZQ+20);
MQDZ:=IF(QM>QZQ,REF(MACD,QM),0);
XG1:=MACD<0 AND MACD>MQDZ
AND CLOSE=LLV(CLOSE,QZQ+20) AND MQDZ<0;
XG:REF(XG1,1)=1 AND MACD>REF(MACD,1);
或者 {XG:REF(XG1,1)=1 AND MACD>REF(MACD,1)AND DIFF>REF(DIFF,10);}

Ⅸ 背離王指標怎樣在底背離,頂背離加買賣點

{背離王}

A1:=FORCAST(EMA(C,5),6);

A2:=FORCAST(EMA(C,8),6);

A3:=FORCAST(EMA(C,11),6);

A4:=FORCAST(EMA(C,14),6);

A5:=FORCAST(EMA(C,17),6);

B:=A1+A2+A3+A4-4*A5;

TOWERC:=EMA(B,2);

FORCAST(EMA(B,3),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,4),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,5),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,6),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,7),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,8),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,9),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,10),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,11),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,12),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,13),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,14),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,15),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,16),6),POINTDOT,COLORGREEN;

FORCAST(EMA(B,17),6),POINTDOT,COLORGREEN;

STICKLINE(TOWERC>=REF(TOWERC,1),TOWERC,REF(TOWERC,1),3,0),COLORRED;

STICKLINE(TOWERC<REF(TOWERC,1),TOWERC,REF(TOWERC,1),3,0),COLORGREEN;

DRAWICON(REF(TOWERC,2)>REF(TOWERC,1) AND TOWERC>=REF(TOWERC,1),TOWERC-1,7);

DRAWICON(REF(TOWERC,2)<REF(TOWERC,1) AND TOWERC<REF(TOWERC,1),TOWERC+1,8);

Ⅹ 求高手編寫大盤指數MACD周線頂底背離公式

頂背離或者底背離屬於形態分析范疇，你要有具體的判斷條件才能編寫，你也沒說具體怎麼判斷讓別人怎麼給你編寫啊。

例如下面的macd背離畫圖主圖與副圖，要有具體判斷條件才能編寫。例如下圖指標通過選擇參數能對比dif值背離，dea值背離，macd柱背離，macd背馳。至於你想用在什麼周期都可以，分鍾，小時，日線，周線，月線等等都可以。